There must be times when one of non-home equipment is working properly and your dish is no exception. If this happens, then there are some sections that you check first to find out, the origin of this problem. Before you do all the checks below, be sure the power for safety from the mains. Here is part of the dishwasher, you can check yourself:
1. Check the power supply to your dishwasher. Is the power supply reaches a dishwasher? When there are several problems with the fuse or circuit breaker, then the force will not reach the washer and as a result it will not work at all. Therefore you need to replace a blown fuse or circuit breaker.
2. Check to change the door. The main door switch plug from the outlet to the engine. Therefore, it should work no errors in the switch for the dishwasher door at all correct. You can change a broken cover by locating the control panel
3. Check the cable. If your dishwasher is old enough, then it is likely that cable systems are fragile. This means that the wire can be burned easily and then blocking the connection. If the problem is in fact made from brittle cable, then you need to change the entire cable system in your dishwasher and connections.
4. The problem can also switch from the dishwasher and timer. The only alternative if they are damaged, they must be replaced by new ones, because the device is not repaired.
5. Water at ordinary dishwasher inlet may also be a source of the problem. One thing to point defects, if the water supply, the dishwasher is not enough so machines do not thoroughly clean the dishes. Another indication of this lack is a knock out of the dish called "water hammer". You can find these regulators in the lower left panel, consisting of a rubber hose with 2 wires and connect to the water supply. If it is true that there is a problem, then replace the entire controller is the only thing you can do.
6. Check the float switch. Each dish had to be used has always been an active swimmers to prevent water overflow. This device is made of plastic, which increases to the level of the water. if float switch stuck and not in accordance with the water level, then there is a clear sign or even change.
7. Check the internal filter. Find the filter to waste in the dishwasher or food particles to prevent the circulation pump. If the filter is dirty or clogged with some garbage or food waste is dishwasher you probably do not wash the dishes thoroughly. This means that you cleaned the filter. It is very easy to do. If you keep the manual for more instructions on how to properly clean the filter. But new models are equipped with the rule of automatic self-cleaning, so that cleaning will not even bother with the filter manually.
The above are some tips, tips for your miele dishwasher , if they stay stuck and can not correct. They are to actually quite easy, but if you are in, you can only call out by a technician for repairs.